Customizing, Cutting and Modifying Blocks
Splitting and cutting blocks
The AB Courtyard Collection blocks come with a built in angle. By splitting the blocks at a quarter(1/4),half (1/2) or three-quarter(3/4) length, you create a straight side to the block. See the AB Courtyard product page for detailed information as to where the blocks are to be cut or split to fit properly.
The straight side that is created with splitting is needed when meeting up with a flat surface or when building curves within a wall panel. You can modify the blocks using a hammer and chisel when splitting or a saw with a masonry blade when cutting the block. Some of the blocks are produced with pre-marked splitting notches for ease of locating the cut line, but any ofthe blocks can be modified
Always wear safety glasses when splitting or cutting block. A dust mask is recommended when cutting block.
Score all sides of block with chisel
A few sharp blows should yield a nice split
Score block with a saw
Use chisel and hammer to split at score line
Splitting an AB Courtyard Block
Splitting and Cutting Tools
Use a hammer and chisel,tap around the entire block in the same locationwhere the split is needed to create a quarter(1/4),half(1/2) or three-quarter(3/4)length piece. Then strike the chisel with more force in the score line to break the block
Cutting an AB Courtyard Block
Use a circular saw to score around the entire block in the same location where the split is needed to create a score line for the quarter(1/4), half(1/2) or three-quarter(3/4) length piece.Then with a hammer and chisel,tap around the score line until the block splits. A masonry saw or a metal chop saw can also be used to make a complete cut through the block, eliminating the use of the hammer and chisel.
Cutting AB Courtyard Corner Blocks
First determine where the corner block will need to be cut/split.
Use a circular saw with a masonry blade to score around the entire block and then with a hammer and chisel score around the block until it breaks. This should yield a nice split.
Use a masonry saw with a dry cutting diamond blade. This method makes a complete cut and eliminates the need for a hammer and chisel.
Use a metal chop saw with a dry cutting diamond blade to cut the block.
NOTE: Masonry saws and metal chop saws are available for rental at most retail centers.